Professional multipurpose

       skin barrier foam

  for daily skin protection

 
               

    Helping professionals protect their

                    skin since 1988
              for only pennies a day

 



	Marly Skin Guard™ is the only solvent free skin barrier foam in the world, 
	which means it is the only skin barrier foam that can be used on both 
	healthy and unhealthy skin, because solvents are irritants in themselves.
 
 
            Check out our new Marly Skin Guard vs. Hydrochloric Acid video on  
 
Here is what people love about Marly Skin Guard™. It forms a two-dimensional skin barrier which protects
the skin against abuse from the elements by inhibiting absorption of: 
  • alkaline & acidic solutions; 
  • organic solvents & dust; 
  • aggressive cleansers & disinfectants; 
  • chemicals & lubricants; 
  • body secretions, blood, urine & feces;
  • paints, inks & dyes.
And it helps prevent skin problems when constantly wearing latex and work gloves and from frequent cleansing
and sanitizing, and it can also be used as a skin barrier against rashes caused by incontinence and diaper rash
on babies. 
 
 
Skin Benefits: The skin maintains a natural moisture balance. 
Marly Skin Guard™ is totally harmless and non-toxic. There is no 
occlusion or pseudo-occlusion, it does not affect sense of touch
or normal skin function, it is non-greasy, it doesn't feel sticky,
and the skin breathes and perspires normally.
 
 
 
Application: 
1.    Wash with soap and water. The skin must be clean and dry. 
2.    SHAKE THE CAN WELL before dispensing Marly Skin Guard™. 
3.    Dispense the foam by pressing the application nozzle while holding the can upside down.
4.    Apply the required amount of foam to the skin by gently rubbing it over the area to be protected. When
    protecting your hands, a walnut-size dollop (standard application) is sufficient (see picture above). 
    Ensure the foam is also applied onto the tips of the fingers and into the cuticles.
5.    Marly Skin Guard™ can be used externally on the whole body.
    Please note that Marly Skin Guard™ does not protect mucous membrane.
6.    Allow 3 minutes to fully dry.
 
 
 
 
        THE SKIN BARRIER IS NOW INTACT FOR AT LEAST 4 HOURS.
            Even if the skin is washed and sanitized several times during
               the 4 hour period, further applications are not necessary.
 
 
 
 
                        Introductory Price: $29.95 per 100mL can. 
 
      Manufacturer Suggested Retail Price (MSRP): $34.95 per 100mL can.
 
 
Cost per Standard Application:
 
   • A 100mL can of Marly Skin Guard™ = 150 standard applications.
   • At $29.95 a can, that is 20 cents per standard application.
   • Each application lasts over 4-hours, so a person will apply Marly
     Skin Guard™ twice a day: once before work, then again after
     lunch.
   • A 100mL can should last a person around 75 x 8-hour workdays.
   • And at roughly 20 workdays per month, a can should last that
     person approximately 3.5 months.
   • At 20 cents per standard application, that is only 
     40 cents a day.
 
      A small price to pay for healthy skin.
 
 
 
Shelf Life:  An unopened can of Marly Skin Guard™ has a shelf life of 5-years
                and 2-years after its first use.
 
 
 
                    An Effective Skin Barrier Foam
 
 
 
 
A cross section of the skin with Marly Skin Guard™
(colored blue) forming an effective barrier against a layer of grime.
 
 
 
 
 
	Marly Skin Guard™ is a non-toxic, solvent free barrier foam, 
	that can be used on both healthy and unhealthy skin, and dries 
	within 3 minutes. It protects against skin irritations caused by
	wearing gloves and from exposure to many harmful and irritating 
	substances. Best of all, unlike other barrier products, it is non-greasy, 
	the skin breathes and perspires normally and it lasts over 4 hours 
	even with frequent washing and sanitizing.

 
							Made in Germany 
 
 
 
                Thank you and enjoy the benefits of using Marly Skin Guard™.